Regal® R&O ISOCLEAN® Certified Lubricants are turbine oils designed to give outstanding performance in steam and hydroelectric turbines.
Benefits:
Regal R&O oils deliver value through: Long lubricant life provided by excellent thermal and oxidation stability. Formulated with an ashless, zinc-free formulation. Excellent demulsibility helps ensure good lubricant film strength and minimal wear through quick water separation. Excellent air release in turbine oil reservoir systems by the foam inhibitor hastening the release of foam and entrained air. Rust protection of metal surfaces due to the use of an effective rust and corrosion inhibitor. Environmental benefits -- All grades are ashless. This facilitates reclaiming and recycling of the used oils
Areas of Consideration:
Low Pressure; Reciprocating; Oil Lubricated; Operating Temperatures Above 140F; No Gear Reduction Unit; Backstop; Shop; Portable
Applications:
Regal R&O oils ISO 32 through ISO 150 are recommended for use in most electric motor bearings, air compressors, gears, hydroelectric turbines, steam turbines, marine turbines, and non-heavy duty hydraulic systems where OEM recommends R&O type oils (for heavy duty hydraulic systems, customers should consider Rando HD oils). These products can also be used as a general purpose machine oil for shop use when R&O type oil is needed or is recommended. The multifunctional characteristics of Regal R&O type oils may allow them to replace other special application lubricants, which can result in reduced inventory and operating cost. Do not use Regal R&O in large and high temperature gas turbines. GST® Oils are recommended for these gas turbines.Use only in well ventilated areas. Keep container closed. Do not use in breathing air apparatus or medical equipment. Note that finished lubricants may affect the adherence of applied protective coatings (such as paint). If this product is used where coating applications are performed, the coating manufacturer should be consulted regarding adequate surface preparation.
OEM Specs:
- ANSI/AGMA 9005-F16-RO requirements
- DIN 51517/2 CL requirements
- MORGOIL Advanced specifications